Socialpost

Complete News World

HS Freeze 1s – Aufsteckblitz mit 80 Ws

HS Freeze 1s – 80W Stabilized Flash | technology

With the HS Freeze 1s, Rollei expands the Freeze flash series with the first flash installed. This is compatible with cameras from Canon, Nikon, Fuji, Panasonic, Olympus as well as Sony, although an adapter is required for the latter. Equipped with a circular zoom inverter, the built-in flash unit provides a maximum flash output of 80W and has a built-in 2.4GHz remote control trigger that is compatible with other freeze flashes.

Photographers can choose between slave mode, master mode, and manual mode to use the flash unit. In addition, the flash offers HSS, TTL synchronization, 1st / 2nd shutter-curtain sync, and freeze. In freeze mode, the burning time is up to 1/50000 seconds with a maximum recycle time of 1.5 seconds at a color temperature of 5500K.

To avoid interference with other devices, the settings can be divided into 31 channels and 6 groups. Settings made at any time on the 2.8 inch touch screen can be checked and adjusted if necessary.

As an alternative to mounting to a flash shoe, the HS Freeze 1s can be attached to a tripod via an integrated 1/4″ thread on the side or set up using the included cold shoe mount.

The replaceable lithium-polymer battery with a capacity of 1600 mAh provides the required power, one battery charge is sufficient for up to 450 activations, according to Rollei. In addition to the replaceable battery, the scope of delivery also includes a transport bag, a return card and a charger with a charging cable. The HS Freeze 1s Soft Toy, an accessory set with six different color attachments, Honeycomb Cell, Sony Adapter and Bowens Adapter are available as optional accessories.

See also  The new Ford Mustang can do it

The cost of the HS Freeze 1s flash is 249 euros. For more information, see Rollei’s website.

Technical information

Perfomance: 80W / 80W
Directory number: 60 (magnification level 5 corresponds to a focal length of 105 mm | detection range from 28 mm to 105 mm)
Flash modes: TTL / Manual
Sync modes: Normal / Freeze / HSS
power control: 9 levels (0.1 / 1.0 steps)
Burning time (t = 0.5 s): Normal: 1/800 – 1/10000 sec
Freezing: 1/2000-1/50000sec
Recycle time: 1.5 seconds (full power)
Burst mode: frames per second: Up to 20fps
Channels | groups: 31 | 16
color temperature: 5,500 K +/- 150 thousand
modeling light | Regulation: 3 watts | 3 steps
Receiver: built in
Frequency range (GHz): 2.402 – 2.480 GHz
Maximum radiated transmit power (dB): 6 dBm
power supply | Battery operation: AC Adapter Input: AC 100-240V, 50/60Hz, 0.5A Max | Output: 5.0V 3.0A, 9.0 ⎓V 2.0A, 12.0V ⎓ 1.5A
Battery charger input: 5.0V ⎓ 3.0A | Output: 12.6VDC, 1.0A, 12.6W | Replaceable, rechargeable Li-Polymer battery (Input: 12.6VDC, 1.0Ah, 12.6W | Capacity: 11.1V/1600mAh/17.76W)
tripping in battery mode: > 450 (full power)
cooling: Yes, negative
More equipment: Zoom function, Multi compatible hot shoe connection, Canon RT compatibility (99 IDs enabled), USB-C connection for firmware update, Auto power off, Thread connection ¼”, Remote release function
Compatible Camera Brands: Canon, Nikon, Fuji, Panasonic, Olympus,
Sony (Sony cameras via separately Available adapter)
Compatible radio players: Professional Radio Transmitter Mark II Professional Radio Transmitter U7 Professional Radio Transmitter
Dimensions (L x W x H) 8.5 x 3 x 3 inches
Weight: 460 grams
HS Freeze 1s - 80W Stabilized Flash
HS Freeze 1s - 80W Stabilized Flash