Socialpost

Complete News World

Network Multi Gas Detector // Technical Trade

Network Multi Gas Detector // Technical Trade

September 13, 2022 // PPE for occupational safety

Bernard Flick

Reliable warning of gas hazards is essential to personal protection in the workplace. The X-am 2800 Multi Gas Detector measures up to four gases simultaneously. Sensors can be selected for combustible gases and vapors as well as oxygen, carbon monoxide, hydrogen sulfide, nitrogen dioxide and sulfur dioxide. The “CatEx” shockproof sensor can be configured specifically for flammable vapors such as gasoline, diesel or non-petroleum and gases such as methane, propane, and hydrogen. In addition, the sensor is particularly resistant to poisoning.

The meter is optimized for use with the cloud-based software solution Dräger Gas Detection Connect. The recorded data can be transferred directly to the smartphone via Bluetooth and from there to the Dräger Gas Detection Connect Cloud. Data can also be transferred directly to the software using the “Dräger X-dock” test station for efficient device management. Users can safely access their data at any time via an internet browser.

Stable design and easy operation

In addition to reliability, wearing comfort and durability are especially important for gas detectors, since the device is worn directly on the person. The X-am 2800 is easy to carry with a clip due to its small size and light weight. Thanks to the large buttons, it can also be easily operated with gloves. The large screen clearly displays important information such as gas readings, alarms and time. A green status light indicates that the device is ready for use. The user instructions are language-free. “X-am 2800” is approved for Zone Ex 0 and tested to protection class IP 68. Rugged design is confirmed by drop test, the device withstands drops of more than 2 meters.

See also  Microsoft Exchange servers under fire again

Accessories from the “Dräger X-am” series can still be used on the “X-am 2800”. This applies, for example, to a charger, an “X-dock” station, or a calibration adapter. Dräger’s long-life sensors and rechargeable and replaceable power supply easily allow the device to be used for a long time. During development, attention was paid to sustainability. Technical documentation and packaging are designed to save paper. When ordering more than two devices in the standard version, the number of operating instructions can be reduced. Dräger ensures that used appliances are properly recycled.

Drägerwerk AG & Co. KGaA, Lübeck, T +49451882 0, www.draeger.com/de_de/Safety

Manufacturers in this thread

You may also be interested in!

01 July 2013 // Personal protective equipment for occupational safety

May 14, 2018 // Personal protective equipment and occupational safety

April 04, 2014 // Personal protective equipment and occupational safety

0 comments

You are not currently logged in.

To leave a comment, please log in.

In order to optimally design our site for you and to be able to continually improve it, we use cookies. By continuing to use the site, you agree to the use of cookies. You can find more information about cookies in our data protection declaration.


yes